First estimations of the aerosol optical thickness using Langley Method at Southern Brazil (29.4°S, 53.8°W)

The first estimations of the aerosol optical thickness (AOT) using Langley Method at Southern Space Observatory (SSO) at Southern Brazil (29.4°S, 53.8°W) are presented. In addition to ozone and sulphur dioxide columns, AOT can be obtained using Brewer Spectrophotometer at specific wavelengths: 306.3, 310.1, 313.5, 316.8 and 320.1 nm. The AOT was obtained for the period from November/2002 to May/2003. Very low AOT averages were obtained, whose values were about 0.21 ± 0.03 at 306.3 nm, 0.21 ± 0.02 at 310.1 nm, 0.19 ± 0.02 at 313.5 nm, 0.20 ± 0.02 at 316.8 nm and 0.20 ± 0.02 at 320.0 nm for all period analysed. Different behaviour of AOT were obtained at two daily specific periods of aerosol accumulation, one in the afternoons from November/2002 to February/2003, caused mainly by a mild biomass burning season’s in the region and other in the mornings from March to May/2003, due the high relative humidity presented in the region studied.     

射线检测厚度宽容度的分析与测定

厚度宽容度是变截面工件射线检测的重要参数。本文分析了典型工件的厚度差,以及不同灵敏度级别的厚度宽容度。应用胶片特性曲线、曝光曲线,从实验角度测量了厚度宽容度,并对结果作了分析和讨论。     

板料应力成形极限判据的有限元分析程序

为了解决在板料成形有限元数值模拟中以依赖于加载路径的应变成形极限为判据所存在的问题,以板料塑性变形时所遵循的应力应变转换关系、H ill二次厚向异性准则为计算模型,基于有限元商用分析软件DYNAFORM,开发了用于板料塑性成形工艺的以应力成形极限为判据的有限元分析程序。利用该程序分析了两种拉深件的有限元数值模拟结果,实现了用应力成形极限图作为判据对板料成形极限的预测分析。所开发的以应力成形极限作为判据的有限元分析程序为分析多道次板成形的成形极限提供了新的手段。     

紧凑热交换器优化设计

对各种传热表面的板翅式紧凑热交换器进行了优化设计计算，建立了通用优化程序系统。此程序既适用于一般地面热交换器，也适用于飞机空调中的热交换器。与传统的设计计算相比较，优化设计的效果很好。热交换优化后，肋片的形状变得更加合理，芯体传热表面更加紧。通过各种肋片的计算得出，条状肋片为板翅式肋片中的最佳者。     

蓄冰盘管冰层厚度测量及管外蓄冰性能实验

提出了一种新型简便的冰层厚度测量方法,该方法用测量冰层内温度分布的方法间接测量冰层动态厚度及冰层的相界面生长规律。对蓄冰盘管外结冰过程的实验研究表明,测量方法可靠,具有较高的测量精度;实验发现,蓄冰盘管外上部冰层生长较快,而下部冰层生长较慢,而在实验参数范围内管内乙二醇水溶液流量对冰层生长速度影响不大。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

气泡和液滴在上升或下降时大变形的数值模拟

本文在考虑界面张力的条件下用涡片方法导出了二维无粘气泡和液滴在另一种静止无粘流体中上升或下降时运动和变形的支配方程，提出了求解支配方程的数值方法，并在数值模拟的例子中研究了空气泡和煤油滴在水中上升时及水滴在煤油中下降时的变形规律，研究了数值模拟中界面张力对界面形状的影响，气泡上升的数值模拟结果与相应的试验结果基本一致。数值模拟结果表明本方法可正确模拟饣泡和液滴在上升或下降过程中的大变形，直到界面发     

变厚度锥形壳的固有频率

 变厚度锥形壳体的固有频率使用有限元计算已无困难,但有限元法编制程序复杂、费时多。本文用半解析法,由锥形壳的基本方程导出等价的8个一阶微分方程,用数值积分方法得到变厚度锥形壳体的固有频率。方法简单,编程容易,计算精度已满足工程计算要求。     

零件纵向厚度的计算方法

在用车床加工空心旋转体零件时，通过测量我们可以得出外轮廓曲线，但根据零件的设计技术要求，不同点处的法向厚度不同，因此在用车床加工时需要计算出各点的纵向厚度。本文给出了根据法向厚度及外曲线计算纵向厚度的方法．该方法简单、可靠，易于计算，而且由此方法计算的结果应用到实际加工时，效果非常好，该方法实用性强，易于推广使用。     

磁控溅射沉积工艺条件对薄膜厚度均匀性的影响

薄膜厚度均匀性是衡量薄膜质量和镀膜装置性能的一项重要指标.在自行设计的磁控溅射沉积设备上,对薄膜沉积工艺中靶基间距、溅射功率、工作气压对膜厚均匀性的影响进行了研究,由连续光谱椭圆偏光仪SE800测量薄膜厚度.结果表明:靶基间距较大的情况下,薄膜均匀性明显改善;溅射功率和工作气压对薄膜均匀性也有较大的影响.